Clearone CHATAttach 150 Manual User Manual download pdf (Page 20)

Chapter 4: Using the Chat Application 17

CHAPTER 4: USING THE CHAT APPLICATION

USING THE CHAT APPLICATION

1. If not already open, start the CHAT application.

2. Click the My Devices button and select the device you want to tune (select the Other or All option if your device/

application is not listed), then click the Apply to CHAT button.

3. For external hardware devices, connect the device to the CHAT 150 using the appriopriate connection diagrams

located in Chapter 2: Getting Started.

4. Adjust the speaker and volume settings on the external device or in the application to 50% (half volume).

5. Click the Advanced button to display the pre-defined audio settings for the device you selected in step 2. Use

the USB Audio section of the screen to tune applications; use the Line Audio section to tune external hardware

devices connected to the CHAT 150 breakout box.

> NOTE: In the Advanced screen, adjusting Microphone Level under USB Audio changes the CHAT

150 microphone volume for USB applications, while adjusting the Output Level under Line Audio

changes the microphone volume being sent to the device connected to the CHAT 150’s line audio jack.

Likewise, adjusting Speaker Level under USB Audio changes the CHAT 150 speaker volume, while

adjusting the Input Level under Line Audio changes the speaker volume being received from the

connected device.

6. Place a call using the device or application. Land lines provide the best audio for tuning purposes.

7. Ask the person on the other end of the call to count from 1 to 10 in a normal voice. While the person is counting,

click and move the Input slider in the CHAT application until the caller’s voice can be clearly heard. Repeat as

needed to find the optimal speaker volume for the device.

8. While the caller is still connected, count from 1 to 10 in a normal voice. Ask the caller if they can hear you clearly.

Click and move the Output slider until the caller can hear you clearly. Repeat the test count as needed to find the

optimal microphone volume for the device.

9. Click Save to Database to capture the optimized settings. The Add Settings to Database dialog appears. Enter

appropriate name in the Model field, then click the Save to Database button.

10. The optimal audio settings for the device or application are now ready for use. Repeat steps 1 through 9 for any

additional devices and applications.

To switch between audio settings for different devices and applications, click the My Devices button, select the desired

device or application, then click the Apply to CHAT button. The audio settings are instantly applied for the chosen

device or application.

Using A Third-Party Application

IfyouareusingtheCHAT150withanapplicationotherthanCHAT−suchasCiscoCommunicatororSkype-ClearOne

recommends using the tuning wizard or audio configuration controls in that application to adjust audio settings. If the

application does not have a tuning wizard or audio settings, use the CHAT application to tune audio settings for optimal

sound quality as explained in the previous section. Audio setup information can also be found for the CHAT Application

in the next few pages.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 32 33

No comments

Clearone CHATAttach 150 Manual User Manual Page 20