ClearOne VIEW Pro D110 Installation Manual download pdf (Page 6)

2 tEChnICal suPPort: 800.283.5936

Connections

The VIEW Pro D110 decoder has connectors as described below.

• 1x - IR Input connector compatible with StreamNet IR sensor (3.5mm)

• 1x - IR Input Receiver window on front panel

• 1x - IR Output connector compatible with StreamNet IR emitter (3.5mm)

• 1x - Balanced Audio Output (Modular Phoenix-type connector, left and right)

• 1x - Stereo 3.5mm Barrel Plug (Line Level) Input (Currently not used)

• 1x - Stereo 3.5mm Barrel Plug (Line Level) Output

• 1x - HDMI output connector.

• 2x - 10/100/1000 Ethernet jacks (Use only jack 1)

• 3x - General Purpose Input (General Purpose Inputs - Digital, 0/5V, Phoenix-type)

• 3x - General Purpose Output (Contact Closure Output, Latching, Relays, Phoenix-type)

• 2x - RS-232 DB-9 connector

• 3x - USB connectors (one USB connector on front panel not visible)

OUTPUTS AND CONNECTIONS

10/100/1000 EthErnEt JaCks

The 10/100/1000 Mb Ethernet connector allows connection to TCP/IP networks setup to run

StreamNet. Only Port 1 (Red Jack) is supported. The other is a service port that MUST NOT be

connected.

status lED

An LED on the front panel lights up when the unit is powered and to report status:

Off=Off

Yellow=Update process has started (e.g.: Update Devices)

Blue=Normal Operation

Green=System Startup/shutdown

Red=Error Condition

hDMI outPut

The HDMI connector on the D110 send digital video and audio.

1 2 3 4 5 6 7 8 9 10 11 ... 30 31

No comments

ClearOne VIEW Pro D110 Installation Manual Page 6