ClearOne V-There 2000 Setup Guide download pdf (Page 27)

NETWORK

The COLLABORATE Room system is a communication device that relies on various

networks and protocols. Before you can use the system, you must configure its network

settings according to the network you intend to use.

SYSTEM SETTINGS (IP)

1. Select Settings>Network>System from the program main menu.

2. In the System Settings window, set the following options and parameters:

 Obtain Address from DHCP Server – Select the checkbox to obtain an IP address

from a DHCP server.

 IP Address – Set the IP address for this system. If using a DHCP server, the

address obtained from the DHCP server is displayed.

 Subnet Mask – Set the subnet mask number for your network. If using a DHCP

server, the address obtained from the DHCP server is displayed.

 Default Gateway – Set the IP address of the default gateway router. If using a

DHCP server, the address obtained from the DHCP server is displayed.

 Obtain DNS Automatically – Use the DHCP server to decide your DNS server

address. If you do not select Obtain address from DHCP server, fill in the following

fields:

 DNS Server – Set the IP address of the DNS server. If using a DHCP server, the

address obtained from the DHCP server is displayed.

 Additional DNS Server – Alternative DNS server, to be used in case the first DNS

server defined can’t supply the needed services.

COLLABORATE Room: Installation and Setup Guide 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

No comments

ClearOne V-There 2000 Setup Guide Page 27