ClearOne AP10 Specifications download pdf (Page 24)

Technical or Setup Assistance

Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • http://www.gentner.com

Page 20 Audio Perfect

10 Installation and Operations Manual

LVL

This command reports back the transmit or receive level for a unit.

O <DEVICE> LVL <CH>

Explanation

<CH> is which parameter to be measured.

CH= RXIN Parameter for level from the telephone line

CH=RXOUT Parameter for level from the AP10

CH=TXIN Parameter for level into the AP10

CH=TXOUT Parameter for level to the telephone line

Return Values

LVL will return the output level of the line channel in the same format as the command.

Example

If is current level for RXIN channel is -20dBu, the following is returned out the serial port:

<DEVICE> LVL RXIN -20

MUTE

This command controls or reports the mute status of a channel .

O <DEVICE> MUTE <CH> <X>

Explanation

<CH> is the channel(s) to be muted/unmuted.

CH=T Parameter to apply to the transmit channel

CH=R Parameter to apply to the receive channel

CH=* Parameter to apply to both channels

<X> is the action (i.e. mute, unmute, report the mute state).

X=0 Set mute to off

X=1 Set mute to on (mute the selected channel)

X=2 Parameter to toggle the state from one state to the other (regardless of current state)

X=NULL Report the current state of mute for the selected channel

Return Values

MUTE returns the mute status in the same format as the command.

Example

If current state of mute for channel T is muted, If current state of mute for channel T is unmuted,

the following is returned out the serial port: the following is returned out the serial port:

<DEVICE> MUTE T 1 <DEVICE> MUTE T 0

Appendix B:

Continued

The flag symbol “O” signals the start of a command line. For serial port command

protocol and syntax, see page 18.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

No comments

ClearOne AP10 Specifications Page 24