ClearOne AP10 Specifications download pdf (Page 5)

Technical or Setup Assistance

Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • http://www.gentner.com

Audio Perfect

10 Installation and Operations Manual Page 1

Power Cord

AP10 Installation

and Operations Manual

Audio Perfect 10

AP10

G-Link

Terminator

Phoenix Push-On

Blocks (x2)

6-foot Telephone Cable

18-inch G-Link

Jumper

Congratulations on purchasing the Audio Perfect

10 (AP10) telephone interface.

The AP10 uses the latest digital technology to maintain the highest possible quality

audio. The AP10 is designed as an accessory to the Audio Perfect

800 (echo

cancelling, audio processing, microphone mixing matrix) to add telephone lines into

audioconferences.

The AP10 is a single-line digital hybrid which uses digital-signal processing (DSP)

to separate the transmit and receive audio, eliminating distortion, weak signals and

feedback. It continually filters low and high frequency noise to provide pure sound.

This manual explains how to install, set up and operate the AP10 in a step-by-step

format. It also supplies instructions on how to resolve technical problems, should

any arise.

If you need any additional information on how to install, set up or operate your system,

please contact us at Gentner Communications at the location noted below. We welcome

and encourage your comments so we can continue to improve our products and serve

your needs.

Gentner Communications Corporation

1825 Research Way

Salt Lake City, UT 84119

TEL: Worldwide 801.975.7200 In U.S.A. 800.945.7730

FAX: Worldwide 801.977.0087 In U.S.A. 800.933.5107

FAX-On-Demand 24-Hour Information Service 800.695.8110

FAX-On-Demand International Line 801.974.3661

Worldwide Web Page @ http://www.gentner.com

Warranty Registration

Please register your Audio Perfect

product online by visiting Gentner Technical

Support at the World Wide Web address listed above. When your product is

properly registered, Gentner Communications will be able to serve you better

should you require technical assistance or desire to receive upgrades, new product

information, etc.

Ensure that the following items (See Figure 1, below) were received with your

shipment:

SHIPPING NOTE:

Gentner Communications is not responsible for product damage incurred during

shipment. You must make claims directly with the carrier. Inspect your shipment

carefully for obvious signs of damage. If the shipment appears to be damaged,

retain the original boxes and packing material for inspection by the carrier. Contact

your carrier immediately.

Figure 1. Equipment diagram

Introduction

Unpacking

1 2 3 4 5 6 7 8 9 10 ... 29 30

Comments to this Manuals

No comments

ClearOne AP10 Specifications Page 5

Comments to this Manuals

Related products and manuals for Networking ClearOne AP10