ClearOne AP10 Specifications download pdf (Page 15)

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

The AP10 has a variety of operational features configurable through DIP switch

settings, including noise burst/auto-adapt, receive AGC control, auto-answer, auto-

disconnect, call progression/loop, receive reduction, and hook-flash duration. Default

settings (as shipped from the factory) are denoted by an asterisk “*”.

Noise burst/auto-adapt

In some applications, you might want to adapt the hybrid with a white noise burst,

rather than allow the hybrid to adapt automatically to line conditions. To enable this

feature, set DIP switch 1 to the On position.

DIP Switch Position Description

1 On (up) Burst adapt

1* Off (down) Auto-adapt

Receive boost

If incoming caller audio is consistently low, activate the Receive Boost. This will

increase receive audio by 6dB. To enable this feature, set DIP switch 2 to the On

position.

DIP Switch Position Description

2 On (up) 6dB Receive audio boost enabled

2* Off (down) 6dB Receive audio boost disabled

CHAPTER 3: Configuration

DIP Switch Settings

Figure 3.1. AP10 DIP switches

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

No comments

ClearOne AP10 Specifications Page 15