ClearOne AP10 Specifications download pdf (Page 27)

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

AP10 Serial Commands

Command Function

AA Sets auto-answer for a telco channel

DIAL Dials a DTMF sequence or reports last sequence dialed

HOOK Sends a hook flash to the telephone line

LVL Reports the level of the transmit or receive channel (read only)

MUTE Sets the mute for the transmit or receive channel

NULL Re-nulls the AP10 to the telephone line

RING Ring acknowledgement

TE Selects/reports the connect state of the unit

TERL Reports the telco echo return loss (read only)

TERLE Reports the telco echo return loss enhancement (read only)

UID Reports the unit identification number

VER Reports the current firmware version

This command activates and deactivates the auto-answer feature.

Command form:

DEVICE

<X>

Explanation:

<X> is the action (i.e. auto-answer enable, auto-answer disable,

current state)

X=0 Parameter disables auto-answer

X=1 Parameter enables auto-answer

X=2 Parameter to toggle the state from one state to the other

(regardless of current state)

X= Null Parameter to report back the current state.

DIAL

DTMF tones can be generated through the AP10. This capability remains active after

a call is placed, so tones can be issued for use with voice mail and pagers. If the

AP10 is not connected when this command is issued, the unit will connect to the

line first, then dial the tone(s).

Command form:

DEVICE

DIAL

Explanation:

<STRING> is any valid combination of touch tone characters. A

comma indicates a two-second pause. STRING has a maximum length of 40

characters. Valid characters are: 0 through 9, #, * and ,

Appendices ~ Appendix C: Serial Commands

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

No comments

ClearOne AP10 Specifications Page 27