ClearOne Converge Pro 840T Specifications download pdf (Page 175)

170

Gating Controllers

Use the Gating Controllers section of the screen to assign Mic Inputs to a gating group. Use Internal gating

groups (radio buttons 1-4) to control mic inputs connected to the unit currently selected in the Site Pane. Use

Global gating groups (radio buttons A-F) to control mic inputs connected to the current unit, as well as all units

connected to the E-Bus.

Press the Configure button to display and modify individual channel Gating configurations using the Channel

Properties Configuration screen.

Internal Gating Groups

Internal gating groups control mic inputs connected to a specific unit. Configure Internal Gating Group settings as

follows:

• Enter a name in the Group Name field (optional).

• Select the First Mic Priority checkbox to enable this feature (default), or deselect it to turn First Mic Priority

off.

NOTE: ClearOne recommends using First Mic Priority to maintain maximum audio intelligibility

by allowing only one mic to gate on to a participant’s voice. First Mic Priority allows more

than one microphone to gate on at same time, but it restricts more than one mic from

gating on to the same audio source. It does this by determining the audio level received

by all mics when the first mic is gated on, and then using this audio level as the ambient

level for the gating group. If First Mic Priority is disabled, two or more microphones will

usually gate on when only one person speaks.

• Select the Max # of Mics from the drop-down list (the default is 4). This sets the maximum number of

microphones that can be gated on at any one time within a gating group. The maximum number of mics is

limited to the number of mics included in the gating group. For internal gating groups, the maximum number

of mics is 8 for CONVERGE Pro 880, 880T, 880TA 8i, CONVERGE SR 1212 and SR 1212A units, and 4 for

CONVERGE Pro 840T units.

• Select the Last Mic Mode from the drop-down list (the default is off). Last On leaves the last mic activated

gated on until another mic gates on. The Input options allow you to select which mic remains on when all

other mics gate off. Off gates all mics off when no audio is present. All allows all mics to gate on at the same

time.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 365 366

No comments

ClearOne Converge Pro 840T Specifications Page 175