ClearOne Converge Pro 840T Specifications download pdf (Page 176)

171

Global Gating Groups

Global gating groups control mic inputs connected to all units linked together through the Expansion Bus.

Configure Global Gating Group settings as follows:

• Enter a name in the Group Name field (optional).

• Select the First Mic Priority checkbox to enable this feature (default), or deselect it to turn First Mic Priority

off.

NOTE: ClearOne recommends using First Mic Priority to maintain maximum audio intelligibility

by allowing only one mic to gate on to a participant’s voice. First Mic Priority allows more

than one microphone to gate on at same time, but it restricts more than one mic from

gating on to the same audio source. It does this by determining the audio level received

by all mics when the first mic is gated on, and then using this audio level as the ambient

level for the gating group. If First Mic Priority is disabled, two or more microphones will

usually gate on when only one person speaks.

• Select the Max # of Mics from the drop-down list (the default is 4). This sets the maximum number of

microphones that can be gated on at any one time within a gating group. Again, the maximum number of

mics is limited to the number of mics included in the gating group. For global gating groups, the maximum

number of mics is eight, up to a maximum of 96 microphones in E-bus linked systems.

• Select the Last Mic Mode from the drop-down list (the default is off). Last On leaves the last mic activated

gated on until another mic gates on. The Input options allow you to select which mic remains on when all

other mics gate off. Off gates all mics off when no audio is present.

For additional information, refer to the Table of Contents for these related topics:

• Mic Input Settings

• Channel Tab Overview

• Mic Gating

• Expansion Bus Overview

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 365 366

No comments

ClearOne Converge Pro 840T Specifications Page 176