ClearOne Converge Pro 840T Specifications download pdf (Page 39)

• 880TA,SR1212A--8speakerterminalsusedtoconnectanexternalspeaker(8Ω).Four,35Watt

internal power amplifiers eliminate the need for an external power amplifier.

NOTE: To reduce risk of electrical shock and damage to equipment, never connect wiring or

external equipment while the amplifier is power is on. Class 2 wiring is required. Maintain

the correct polarity (+/-) on output connectors. (For example: Channel 1 positive (+)

speaker lead connects to amplifier’s channel 1 positive terminal. Channel 1 negative (-)

speaker lead connects to amplifier’s channel 1 negative terminal. Repeat this procedure

for each channel.

11. Telco Line and Telco Set Ports: Two RJ-11 connectors telephone ports. The Telco Line port connects an

analog telephone line to CONVERGE Pro devices. The Telco Set port provides a pass-through connection for

telephone handsets (880TA, 880T, 840T, TH20).

NOTE: The Telco Set port is not available for use when the telephone hybrid is off-hook.

12. Amplifier Terminal Block (880TA, SR1212A): 12 speaker terminals used to connect an external speaker

(70/100 v). Four, 35 Watt internal power amplifiers eliminate the need for an external power amplifier.

NOTE: To reduce risk of electrical shock and damage to equipment, never connect wiring or

external equipment while the amplifier is power is on. Class 2 wiring is required. Maintain

the correct polarity on output connectors. (For example: Channel 1 70/100V speaker

lead connects to amplifier’s channel 1 70V or 100V terminals. Channel 1 GND (or

Common) speaker lead connects to amplifier’s channel 1 GND terminal. Repeat this

procedure for each channel.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 365 366

No comments

ClearOne Converge Pro 840T Specifications Page 39