ClearOne Converge Pro 840T Specifications download pdf (Page 243)

238

APPENDIX A: APPLICATION PROGRAMMER’S INTERFACE

TYPE AND DEVICE IDS

CONVERGE/CONVERGE Pro Device Types and Device IDs by model are as follows:

Model Device Type Device ID Range

880 1 0-B

TH20 2 0-F

VH20 E 0-F

840T 3 0-B

8i A 0-B

880T D 0-B

880TA H 0-B

SR 1212 G 0-B

SR 1212A I 0-B

Beamforming

Mic Array

N 0-F

CONVENTIONS

This guide uses the following typographic conventions to describe CONVERGE/CONVERGE Pro serial command

syntax:

Convention Description

<X> Parameters enclosed in < > indicate a mandatory parameter

[X] Parameters enclosed in [ ] indicate an optional parameter

1-8 Parameters separated by a ‘-‘ indicate a range of allowable values

4,7,9 Parameters separated by a ‘,’ indicate a list of allowable values

EREF Words in UPPERCASE bold indicate command text

Device

Indicates the device type and device number on the Expansion Bus. It is composed

of a device type character and a device ID character.

COMMAND FORM DESCRIPTION

The structure of serial commands is as follows:

# <Device Type> <Device ID> <Command> [Values] <Carriage Return>

# indicates the start of a command line, the Carriage Return terminates a command.

NOTE: Serial commands can be either UPPERCASE or lowercase. Return values are always in

UPPERCASE. In order for a command to be recognized by the RS-232 serial port, the

command must be terminated by a carriage return.

For example, a command to disable mute for Mic Input 5 on a CONVERGE Pro 880 with a Device ID of 2 would

have the command line #12 MUTE 5 M 0.

In this command line, 1 = the Device Type for CONVERGE 880, 2 = the Device ID for unit 2, MUTE = serial

command, 5 = the channel Value, M = the channel type Value for mic input channels, and 0 = the command

Value that turns mute off.

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 365 366

No comments

ClearOne Converge Pro 840T Specifications Page 243